pragma solidity ^0.4.24; /** * @title IERC165 * @dev https://eips.ethereum.org/EIPS/eip-165 */ interface IERC165 { /** * @notice Query if a contract implements an interface * @param interfaceId The interface identifier, as specified in ERC-165 * @dev Interface identification is specified in ERC-165. This function * uses less than 30,000 gas. */ function supportsInterface(bytes4 interfaceId) external view returns (bool); } /** * @title ERC721 Non-Fungible Token Standard basic interface * @dev see https://eips.ethereum.org/EIPS/eip-721 */ contract IERC721 is IERC165 { event Transfer(address indexed from, address indexed to, uint256 indexed tokenId); event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId); event ApprovalForAll(address indexed owner, address indexed operator, bool approved); function balanceOf(address owner) public view returns (uint256 balance); function ownerOf(uint256 tokenId) public view returns (address owner); function approve(address to, uint256 tokenId) public; function getApproved(uint256 tokenId) public view returns (address operator); function setApprovalForAll(address operator, bool _approved) public; function isApprovedForAll(address owner, address operator) public view returns (bool); function transferFrom(address from, address to, uint256 tokenId) public; function safeTransferFrom(address from, address to, uint256 tokenId) public; function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public; } /** * @title ERC721 token receiver interface * @dev Interface for any contract that wants to support safeTransfers * from ERC721 asset contracts. */ contract IERC721Receiver { /** * @notice Handle the receipt of an NFT * @dev The ERC721 smart contract calls this function on the recipient * after a `safeTransfer`. This function MUST return the function selector, * otherwise the caller will revert the transaction. The selector to be * returned can be obtained as `this.onERC721Received.selector`. This * function MAY throw to revert and reject the transfer. * Note: the ERC721 contract address is always the message sender. * @param operator The address which called `safeTransferFrom` function * @param from The address which previously owned the token * @param tokenId The NFT identifier which is being transferred * @param data Additional data with no specified format * @return bytes4 `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))` */ function onERC721Received(address operator, address from, uint256 tokenId, bytes memory data) public returns (bytes4); } /** * @title SafeMath * @dev Unsigned math operations with safety checks that revert on error */ library SafeMath { /** * @dev Multiplies two unsigned integers, reverts on overflow. */ function mul(uint256 a, uint256 b) internal pure returns (uint256) { // Gas optimization: this is cheaper than requiring 'a' not being zero, but the // benefit is lost if 'b' is also tested. // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522 if (a == 0) { return 0; } uint256 c = a * b; require(c / a == b); return c; } /** * @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero. */ function div(uint256 a, uint256 b) internal pure returns (uint256) { // Solidity only automatically asserts when dividing by 0 require(b > 0); uint256 c = a / b; // assert(a == b * c + a % b); // There is no case in which this doesn't hold return c; } /** * @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend). */ function sub(uint256 a, uint256 b) internal pure returns (uint256) { require(b <= a); uint256 c = a - b; return c; } /** * @dev Adds two unsigned integers, reverts on overflow. */ function add(uint256 a, uint256 b) internal pure returns (uint256) { uint256 c = a + b; require(c >= a); return c; } /** * @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo), * reverts when dividing by zero. */ function mod(uint256 a, uint256 b) internal pure returns (uint256) { require(b != 0); return a % b; } } /** * Utility library of inline functions on addresses */ library Address { /** * Returns whether the target address is a contract * @dev This function will return false if invoked during the constructor of a contract, * as the code is not actually created until after the constructor finishes. * @param account address of the account to check * @return whether the target address is a contract */ function isContract(address account) internal view returns (bool) { uint256 size; // XXX Currently there is no better way to check if there is a contract in an address // than to check the size of the code at that address. // See https://ethereum.stackexchange.com/a/14016/36603 // for more details about how this works. // TODO Check this again before the Serenity release, because all addresses will be // contracts then. // solhint-disable-next-line no-inline-assembly assembly { size := extcodesize(account) } return size > 0; } } /** * @title Ownable * @dev The Ownable contract has an owner address, and provides basic authorization control * functions, this simplifies the implementation of "user permissions". */ contract Ownable { address private _owner; event OwnershipTransferred(address indexed previousOwner, address indexed newOwner); /** * @dev The Ownable constructor sets the original `owner` of the contract to the sender * account. */ constructor () internal { _owner = msg.sender; emit OwnershipTransferred(address(0), _owner); } /** * @return the address of the owner. */ function owner() public view returns (address) { return _owner; } /** * @dev Throws if called by any account other than the owner. */ modifier onlyOwner() { require(isOwner()); _; } /** * @return true if `msg.sender` is the owner of the contract. */ function isOwner() public view returns (bool) { return msg.sender == _owner; } /** * @dev Allows the current owner to relinquish control of the contract. * It will not be possible to call the functions with the `onlyOwner` * modifier anymore. * @notice Renouncing ownership will leave the contract without an owner, * thereby removing any functionality that is only available to the owner. */ function renounceOwnership() public onlyOwner { emit OwnershipTransferred(_owner, address(0)); _owner = address(0); } /** * @dev Allows the current owner to transfer control of the contract to a newOwner. * @param newOwner The address to transfer ownership to. */ function transferOwnership(address newOwner) public onlyOwner { _transferOwnership(newOwner); } /** * @dev Transfers control of the contract to a newOwner. * @param newOwner The address to transfer ownership to. */ function _transferOwnership(address newOwner) internal { require(newOwner != address(0)); emit OwnershipTransferred(_owner, newOwner); _owner = newOwner; } } /** * @title ERC165 * @author Matt Condon (@shrugs) * @dev Implements ERC165 using a lookup table. */ contract ERC165 is IERC165 { bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7; /* * 0x01ffc9a7 === * bytes4(keccak256('supportsInterface(bytes4)')) */ /** * @dev a mapping of interface id to whether or not it's supported */ mapping(bytes4 => bool) private _supportedInterfaces; /** * @dev A contract implementing SupportsInterfaceWithLookup * implement ERC165 itself */ constructor () internal { _registerInterface(_INTERFACE_ID_ERC165); } /** * @dev implement supportsInterface(bytes4) using a lookup table */ function supportsInterface(bytes4 interfaceId) external view returns (bool) { return _supportedInterfaces[interfaceId]; } /** * @dev internal method for registering an interface */ function _registerInterface(bytes4 interfaceId) internal { require(interfaceId != 0xffffffff); _supportedInterfaces[interfaceId] = true; } } /** * @title ERC721 Non-Fungible Token Standard basic implementation * @dev see https://eips.ethereum.org/EIPS/eip-721 */ contract ERC721 is ERC165, IERC721 { using SafeMath for uint256; using Address for address; // Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))` // which can be also obtained as `IERC721Receiver(0).onERC721Received.selector` bytes4 private constant _ERC721_RECEIVED = 0x150b7a02; // The number of issued tokens uint256 public totalAmount; // The number of existing tokens uint256 public existingAmount; // Mapping from token ID to owner mapping (uint256 => address) private _tokenOwner; // Mapping from token ID to approved address mapping (uint256 => address) private _tokenApprovals; // Mapping from owner to number of owned token mapping (address => uint256) private _ownedTokensCount; // Mapping from owner to operator approvals mapping (address => mapping (address => bool)) private _operatorApprovals; bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd; /* * 0x80ac58cd === * bytes4(keccak256('balanceOf(address)')) ^ * bytes4(keccak256('ownerOf(uint256)')) ^ * bytes4(keccak256('approve(address,uint256)')) ^ * bytes4(keccak256('getApproved(uint256)')) ^ * bytes4(keccak256('setApprovalForAll(address,bool)')) ^ * bytes4(keccak256('isApprovedForAll(address,address)')) ^ * bytes4(keccak256('transferFrom(address,address,uint256)')) ^ * bytes4(keccak256('safeTransferFrom(address,address,uint256)')) ^ * bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) */ constructor () public { // register the supported interfaces to conform to ERC721 via ERC165 _registerInterface(_INTERFACE_ID_ERC721); } /** * @dev Gets the balance of the specified address * @param owner address to query the balance of * @return uint256 representing the amount owned by the passed address */ function balanceOf(address owner) public view returns (uint256) { require(owner != address(0)); return _ownedTokensCount[owner]; } /** * @dev Gets the owner of the specified token ID * @param tokenId uint256 ID of the token to query the owner of * @return address currently marked as the owner of the given token ID */ function ownerOf(uint256 tokenId) public view returns (address) { address owner = _tokenOwner[tokenId]; require(owner != address(0)); return owner; } /** * @dev Approves another address to transfer the given token ID * The zero address indicates there is no approved address. * There can only be one approved address per token at a given time. * Can only be called by the token owner or an approved operator. * @param to address to be approved for the given token ID * @param tokenId uint256 ID of the token to be approved */ function approve(address to, uint256 tokenId) public { address owner = ownerOf(tokenId); require(to != owner); require(msg.sender == owner || isApprovedForAll(owner, msg.sender)); _tokenApprovals[tokenId] = to; emit Approval(owner, to, tokenId); } /** * @dev Gets the approved address for a token ID, or zero if no address set * Reverts if the token ID does not exist. * @param tokenId uint256 ID of the token to query the approval of * @return address currently approved for the given token ID */ function getApproved(uint256 tokenId) public view returns (address) { require(_exists(tokenId)); return _tokenApprovals[tokenId]; } /** * @dev Sets or unsets the approval of a given operator * An operator is allowed to transfer all tokens of the sender on their behalf * @param to operator address to set the approval * @param approved representing the status of the approval to be set */ function setApprovalForAll(address to, bool approved) public { require(to != msg.sender); _operatorApprovals[msg.sender][to] = approved; emit ApprovalForAll(msg.sender, to, approved); } /** * @dev Tells whether an operator is approved by a given owner * @param owner owner address which you want to query the approval of * @param operator operator address which you want to query the approval of * @return bool whether the given operator is approved by the given owner */ function isApprovedForAll(address owner, address operator) public view returns (bool) { return _operatorApprovals[owner][operator]; } /** * @dev Transfers the ownership of a given token ID to another address * Usage of this method is discouraged, use `safeTransferFrom` whenever possible * Requires the msg.sender to be the owner, approved, or operator * @param from current owner of the token * @param to address to receive the ownership of the given token ID * @param tokenId uint256 ID of the token to be transferred */ function transferFrom(address from, address to, uint256 tokenId) public { require(_isApprovedOrOwner(msg.sender, tokenId)); _transferFrom(from, to, tokenId); } /** * @dev Safely transfers the ownership of a given token ID to another address * If the target address is a contract, it must implement `onERC721Received`, * which is called upon a safe transfer, and return the magic value * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise, * the transfer is reverted. * Requires the msg.sender to be the owner, approved, or operator * @param from current owner of the token * @param to address to receive the ownership of the given token ID * @param tokenId uint256 ID of the token to be transferred */ function safeTransferFrom(address from, address to, uint256 tokenId) public { safeTransferFrom(from, to, tokenId, ""); } /** * @dev Safely transfers the ownership of a given token ID to another address * If the target address is a contract, it must implement `onERC721Received`, * which is called upon a safe transfer, and return the magic value * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise, * the transfer is reverted. * Requires the msg.sender to be the owner, approved, or operator * @param from current owner of the token * @param to address to receive the ownership of the given token ID * @param tokenId uint256 ID of the token to be transferred * @param _data bytes data to send along with a safe transfer check */ function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public { transferFrom(from, to, tokenId); require(_checkOnERC721Received(from, to, tokenId, _data)); } /** * @dev Returns whether the specified token exists * @param tokenId uint256 ID of the token to query the existence of * @return bool whether the token exists */ function _exists(uint256 tokenId) internal view returns (bool) { address owner = _tokenOwner[tokenId]; return owner != address(0); } /** * @dev Returns whether the given spender can transfer a given token ID * @param spender address of the spender to query * @param tokenId uint256 ID of the token to be transferred * @return bool whether the msg.sender is approved for the given token ID, * is an operator of the owner, or is the owner of the token */ function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) { address owner = ownerOf(tokenId); return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender)); } /** * @dev Internal function to mint a new token * Reverts if the given token ID already exists * @param to The address that will own the minted token * @param tokenId uint256 ID of the token to be minted */ function _mint(address to, uint256 tokenId) internal { require(to != address(0)); require(!_exists(tokenId)); _tokenOwner[tokenId] = to; _ownedTokensCount[to] = _ownedTokensCount[to].add(1); totalAmount = totalAmount.add(1); existingAmount = existingAmount.add(1); emit Transfer(address(0), to, tokenId); } /** * @dev Internal function to burn a specific token * Reverts if the token does not exist * Deprecated, use _burn(uint256) instead. * @param owner owner of the token to burn * @param tokenId uint256 ID of the token being burned */ function _burn(address owner, uint256 tokenId) internal { require(ownerOf(tokenId) == owner); _clearApproval(tokenId); existingAmount = existingAmount.sub(1); _ownedTokensCount[owner] = _ownedTokensCount[owner].sub(1); _tokenOwner[tokenId] = address(0); emit Transfer(owner, address(0), tokenId); } /** * @dev Internal function to burn a specific token * Reverts if the token does not exist * @param tokenId uint256 ID of the token being burned */ function _burn(uint256 tokenId) internal { _burn(ownerOf(tokenId), tokenId); } /** * @dev Internal function to transfer ownership of a given token ID to another address. * As opposed to transferFrom, this imposes no restrictions on msg.sender. * @param from current owner of the token * @param to address to receive the ownership of the given token ID * @param tokenId uint256 ID of the token to be transferred */ function _transferFrom(address from, address to, uint256 tokenId) internal { require(ownerOf(tokenId) == from); require(to != address(0)); _clearApproval(tokenId); _ownedTokensCount[from] = _ownedTokensCount[from].sub(1); _ownedTokensCount[to] = _ownedTokensCount[to].add(1); _tokenOwner[tokenId] = to; emit Transfer(from, to, tokenId); } /** * @dev Internal function to invoke `onERC721Received` on a target address * The call is not executed if the target address is not a contract * @param from address representing the previous owner of the given token ID * @param to target address that will receive the tokens * @param tokenId uint256 ID of the token to be transferred * @param _data bytes optional data to send along with the call * @return bool whether the call correctly returned the expected magic value */ function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data) internal returns (bool) { if (!to.isContract()) { return true; } bytes4 retval = IERC721Receiver(to).onERC721Received(msg.sender, from, tokenId, _data); return (retval == _ERC721_RECEIVED); } /** * @dev Private function to clear current approval of a given token ID * @param tokenId uint256 ID of the token to be transferred */ function _clearApproval(uint256 tokenId) private { if (_tokenApprovals[tokenId] != address(0)) { _tokenApprovals[tokenId] = address(0); } } } contract Blockstone is ERC721, Ownable { /** * @dev Return all token IDs owned by an owner * @param owner address to query * @return uint256[] all token IDs */ function getOwnersAllTokens(address owner) public view returns (uint256[] memory) { uint256[] memory tokens = new uint256[](balanceOf(owner)); uint256 counter = 0; for (uint256 id = 0; id < totalAmount; id++) { if (ownerOf(id) == owner) { tokens[counter] = id; counter++; } } return tokens; } /** * @dev Mint a new id for an address * @param to address to own the newly-minted token * @param tokenId new token id */ function mint(address to, uint256 tokenId) public onlyOwner { // Restrict the token ID to be incremental, and things will be easier require(tokenId == totalAmount); _mint(to, tokenId); } }
0.4.24